Why Did My Fudge Remain Smooth After Beating? | Ask Nigella.com (2024)

Full question

Hello, I made the Vanilla Fudge and despite whisking with electric beaters at the end the fudge was smooth and not grainy. Can you please tell me where I went wrong?

Our answer

Nigella's Vanilla Fudge is a traditional fudge recipe that is made by boiling butter, milk, condensed milk, sugar and golden syrup to soft ball stage. The fudge is then beaten as this makes the fudge slightly crumbly rather than chewy. Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance. When it sets, the fudge will be slightly crumbly when cut and should melt in the mouth.

It could be that there was an expectation of large sugar crystals rather than smaller ones. The beaten fudge will still look quite smooth and you will not notice large crystals when you eat the fudge. If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help). Otherwise it could be that the fudge cooled too much before it was beaten. The mixture will thicken naturally as it cools and beating it enough once cooled is more difficult. Let it cool for a few moments but not for too long.

Try This Tip

Easy Grated Ginger

From Judy70
  • 14
  • 2

Asked and Answered

Poaching Chicken, Maximizing Flavor

From Unknown
  • 14
  • 2
Why Did My Fudge Remain Smooth After Beating? | Ask Nigella.com (2024)

FAQs

What makes fudge smooth? ›

For first-time candy makers: Look for recipes that call for corn syrup, marshmallows, or marshmallow crème. These ingredients prevent crystallization of sugar into large grains, so the texture of the fudge will remain smooth. Also, recipes using cream or condensed milk are less likely to curdle than regular milk.

What should fudge look like after beating? ›

The fudge is then beaten as this makes the fudge slightly crumbly rather than chewy. Beating the mixture encourages the formation of small sugar crystals, which leads to the crumbly texture. The crystals may not be noticeable in themselves but the fudge mixture will thicken and turn from shiny to matte in appearance.

Why didn't my fudge get hard? ›

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft.

How do you know when to stop beating fudge? ›

Let the mixture cool before beating. The temperature at this point should be 43°C to 45°C (110°F to 113°F). The fudge should be warm but not burning hot. Stop beating when the surface of the mixture starts to look dull or matte.

Why is my fudge not grainy? ›

The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

What is the secret to perfect fudge? ›

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

How can you tell when fudge is done? ›

Points to remember

You know it's ready when a small amount of the mixture dropped into a glass of cold water sets into a soft ball that you can lift out with a teaspoon and pinch between your fingers. Turn off the heat and keep stirring for 5 minutes or until the mix starts to thicken a little.

Should you stir fudge while it's cooking? ›

Don't stir!

Once the fudge reaches soft-ball stage on the candy thermometer, remove from the heat and let the temperature drop to 110°F. Keep that spoon or spatula out of the pot until this happens. If you stir too early in the process, you'll make the sugar crystals too big and end up with grainy fudge.

What to do with failed fudge? ›

My advice to you is to just pour it in a jar, call it something else delicious, and pretend you meant for it to be that way. The nice thing about my “failed” fudge is that it tastes absolutely delicious! A spoonful of the delectable treat will make you want for more.

How do you fix fudge that is too soft? ›

How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

How long does it take for fudge to go hard? ›

Once the fudge has thickened and the nuts are added, pour the fudge into the prepared pan. Allow it to set at room temperature until firm, about three hours or overnight.

What is the soft ball stage of fudge? ›

making of fudge

termed in kitchen parlance the soft ball stage, that point between 234 and 240 °F (112 and 115 °C) at which a small ball of the candy dropped in ice water neither disintegrates nor flattens when picked up with the fingers.

What happens if you over stir fudge? ›

Once the sugar has dissolved and the mixture has come to a boil, do not stir it. If you do, the sugar can crystallize, giving your fudge a gritty texture.

Why did my fudge come out like taffy? ›

If the temperature is too low, the fudge will be too soft and sticky, and if it's too high, it will turn into a hard, crumbly mess. The ideal temperature to cook fudge is between 232-234 degrees F (111-112 degrees C).

How do you test a soft ball stage in fudge? ›

Using a clean spoon, carefully take a little of the syrup and drop it into the bowl of cold water. Leave to cool for a moment then pick up the ball of syrup. If it's pliable, sticky and can be moulded in your fingers easily, it has reached the soft ball stage and the syrup can be used to make fudge and marzipan.

Do you stir fudge when it's boiling? ›

Avoid Stirring Once the Mixture Comes to a Simmer

Another key part of a successful fudge texture is when you stir the mixture. Stirring the sugar and milk during the initial stages of cooking allows the sugar to dissolve. However, once the mixture comes to a boil, it's time to put the spoon down.

What's the difference between smooth and crumbly fudge? ›

Smooth fudge often has a rich and decadent flavour. Crumbly fudge, as the name suggests has a more granular and crumbly texture. It is made with similar ingredients to smooth fudge but cooked to a higher temerature or for a shorter time than smooth fudge.

How do you keep homemade fudge soft? ›

Wrap your fudge in an air-tight container. Several layers of saran wrap, vacuum seal, Tupperware should all keep the moisture locked in pretty good.

Top Articles
Latest Posts
Article information

Author: Pres. Lawanda Wiegand

Last Updated:

Views: 5812

Rating: 4 / 5 (51 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Pres. Lawanda Wiegand

Birthday: 1993-01-10

Address: Suite 391 6963 Ullrich Shore, Bellefort, WI 01350-7893

Phone: +6806610432415

Job: Dynamic Manufacturing Assistant

Hobby: amateur radio, Taekwondo, Wood carving, Parkour, Skateboarding, Running, Rafting

Introduction: My name is Pres. Lawanda Wiegand, I am a inquisitive, helpful, glamorous, cheerful, open, clever, innocent person who loves writing and wants to share my knowledge and understanding with you.